![]() On a first attempt to activate the WDM device you may need to switch the SSL hardware to 48 kHz, otherwise Windows may come up with an error message telling you the device is already in use.Usage - SSL software needs to be started before streaming will work (SSL Mixer, SSL Soundscape V6, or TRack.exe).Select the SSL card's WDM device for recording and playback. Now you might not see any device in the lists for recording or playback tabs, right click and select "Show deactivated Devices". WDM integration - The "easiest" option to tell Windows 7 something about system wide audio devices (WDM) is by right clicking on the speaker icon in the task bar (close to the clock) and selecting "Properties".After reboot, make sure there is a SSL Soundscape WDM Device present in the category "Sound, Video and Game Controllers".For each entry (MadiXtreme and Mixpander) right-click, select update driver and point to the extracted temp directory.Go to Device Manager, locate SSL Soundscape devices.Extract downloaded ZIP file to a temporary directory. ![]() Exit all SSL Soundscape related software.Follow the onscreen Plug and Play Driver Installation and Choose Driver from the extracted Download Directory (Ssdrv_6_x_x_x).Install the driver located in the extracted folder and run DrvSetup.exeĪfter the driver has been updated open the TRack.exe app located in the Ssdrv folder.ĭouble-click on each MadiXtreme Device. Otherwise Windows may reset certain registry entries to a previous state on each reboot and the SSL device may not work as expected.Įxtract downloaded ZIP file to a temporary directory On Windows 64-bit it is mandatory to update/install the driver "the Microsoft Way" as described. The 64 bit driver supports Soundscape V6 streaming, ASIO 32, ASIO 64, and WDM 64.Internet connection for updates and registration.MadiXtreme has not been tested on Windows 10. Windows XP, Vista 32 or 64-bit, Windows 7 32 or 64-bit.to work with Pro Tools 10 you need to set it to 32 channels per card), you have to set the MCL to 32 and reboot your Mac when the Control Panel asks you to do so.Īlpha-Link Live version 2.12 firmware resolves issues seen when using Alpha-Link 8RMP mic control data with a MADI-X8 router. In order to activate a MADI Channel Limit (eg. Note on the new MADI Channel Limit (MCL): ![]() The V1.3 driver requires MadiXtreme firmware 19 to be installed.Ī firmware update requires a complete power cycle to activate the new firmware, so after the firmware update is complete, please power off your Mac. If the Control Panel starts the firmware updater, please follow the onscreen instructions update the firmware immediately. If you are updating from a previous MadiXtreme version, please open the MadiXtreme Control Panel after successful installation and check if the new driver could be started.Ĭertain audio and MIDI services in your system (for example Soundflower, Aggregate Devices) can prevent the successful restart of the new driver, and you may see an empty MadiXtreme control panel.
0 Comments
Leave a Reply. |